Share
FBT J2000 PA Speaker Package
Availability:In stock
SKU
100118
£3,745.00
Seen it cheaper? We aim to match authorised UK dealers
Quick overview
This FBT Audio package comes with everything you need to setup an impressive sound system, two J12A active loudspeakers as well as two Subline S115SA active subwoofers.
This package contains:
- 2 x J12A PA Speaker
- 2 x Subline 115SA Subs
- FREE Poles and Covers
- See full product description
- See bundle deals
This FBT Audio package comes with everything you need to setup an impressive sound system, two J12A active loudspeakers as well as two Subline S115SA active subwoofers. With a 12-inch woofer, the J12 guarantees users incredible sound quality across the frequency spectrum and delivers strong bass and low-ends that travel through the venue.
Additionally, the inclusion of the subwoofer means that you can alleviate your top speakers in producing bass frequencies. By using just your subs you will get pure, distortion-free low-end that will enhance any live performance or DJ set.
With free poles, covers and a carry case -you have all the essential equipment to quickly and efficiently assemble their mobile DJ setup.
J12A PA Speaker Features
- 320mm (12’’) custom woofer with improved efficiency and linearity
- 25mm (1”) HF custom compression driver
- 90°H x 60°V constant directivity horn
- 2-way bi-amplified system in Bass-Reflex
- 350Wrms class D amplifier for LF and 100Wrms for HF
- High efficiency switch mode power supply
- On-board Digital Signal processing with dynamic equalizations and protections for high SPL and high reliability
- 4 DSP preset for maximum acoustical flexibility
- Polypropylene enclosure with integrated handle
- 2 x M10 anchoring points
- 35mm Internal top hat
- Net weight 13.7kg
- Net dimensions 410x663x387mm (W/H/D)
Subline 115SA Speaker Features
- Bass-reflex design with high SPL and punch
- 380mm (15”) high excursion magnet woofer with 75mm (3”) voice coil
- Frequency response from 40Hz to 140Hz
- New amplifier engineered and manufactured by FBT, 700W RMS LF in Class D
- Digital Signal processor with 8 presets, 2 equalization with 2 LPF
- Crossover settings, cardioid configuration
- Control panel with Stereo XLR in/outs, Volume, EQ presets, 8 steps
- Delay from 0.25m to 3.5m, Phase Reversal Switch 0°-180°, 3 status LED indicators
- 15 mm (0.59”) birch plywood scratch resistant enclosure with internal bracing
- M20 (20mm) top mount speaker stand socket and two aluminum ergonomic FBT handles
FBT J12A Speaker Spec
- System Type: 2-Way
- Internal Amplifiers*: cont. 300W+70W RMS, max.: 350W+100W RMS, max peak.: 700W+200W
- Input Impedance: 22kOhm
- Frequency Response: 50Hz-20kHz (@-6dB)
- Maximum SPL cont.peak**: 124dB/128dB
- Dispersion: 90°H x 60°V
- Crossover Frequency: 2kHz
- AC Power Requirement: 400VA
- Low Frequency Woofer: 12" / 2" coil
- High Frequency Driver: 1" / 1" coil
- Input Connectors: XLR-Jack with loop
- Enclosure Material: Polyproylene
- Grille: Steel with powder coat black paint finish
- Dimensions (WxHxD) inch: 16.14 x 26.10 x 15.23
- Weight: 30.2 lbs
*Cont.: 500mS burst, rms power on nominal speaker impedance. Max.: 2mS burst, rms power on nominal speaker impedance. Max peak: based on max peak output voltage and nominal speaker impedance
** Cont. SPL: free space, based on continuous power amp rating and LF transducer average sensitivity data, 125mS time average. Peak SPL: free space, based on max. peak power amp rating and system peak sensitivity, 10mS time average.
FBT J12A Speaker Spec
- System type: 1 way
- Internal amplifier*: max.: 700W RMS, max. peak: 1400W
- Low frequency woofer: 1 x 15" / 3" coil
- Frequency response @-6dB: 38Hz - 140Hz
- Input impedance: 22kOhm
- Max. SPL cont/peak**: 132 / 135
- Dispersion: omnidirectional
- Crossover frequency: 90 or 140Hz
- AC power requirement: 600VA
- Input connectors: Stereo XLR
- Net dimensions (WxHxD): 19,68 x 20,35 x 22,44 inch
- Net weight: 61,72 lbs
- Enclosure material: birch plywood
- Power supply cable: 19,68 ft
*MAX:2mS burst, RMS power on nominal speaker impedance. MAX PEAK: based on max peak output voltage and nominal speaker impedance.
**CONT. SPL: half space, based on continuous power amp rating and LF transducer average sensitivity data, 125mS time average. PEAK SPL: half space, based on max peak power amp rating and system peak sensitivity, 10mS time average.
Got a question or need assistance? Get in touch, we're happy to help.
02380 784500.You may also like
